What end-to-end bus resistance value is typical when terminators are correctly installed?

Unlock all questions

This demo includes only 20 questions. Upgrade to access hundreds of questions, flashcards, exam simulations, and disable ads.

Full question bankExam simulationsFlashcards
From $24.99Unlock all

Enhance your knowledge of NMEA 2000 standards. Study with interactive questions, hints, and explanations, tailored to gear you up for the exam. Excel in marine electronics!

Multiple Choice

What end-to-end bus resistance value is typical when terminators are correctly installed?

Explanation:
Two 120-ohm terminators are placed at the ends of a NMEA 2000 CAN backbone. When you measure the resistance across the two conductors end-to-end, those two terminators appear in parallel, giving 60 ohms. So, with terminators correctly installed, the typical end-to-end bus resistance is about 60 ohms. If you measure around 120 ohms, one terminator is missing or not properly connected; if you see a much higher value or open circuit, termination isn’t present or the wiring is broken. This 60-ohm figure reflects the effective impedance the network presents across the CAN pair, ensuring proper signal integrity.

Two 120-ohm terminators are placed at the ends of a NMEA 2000 CAN backbone. When you measure the resistance across the two conductors end-to-end, those two terminators appear in parallel, giving 60 ohms. So, with terminators correctly installed, the typical end-to-end bus resistance is about 60 ohms. If you measure around 120 ohms, one terminator is missing or not properly connected; if you see a much higher value or open circuit, termination isn’t present or the wiring is broken. This 60-ohm figure reflects the effective impedance the network presents across the CAN pair, ensuring proper signal integrity.

More Multiple Choice Questions
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy